Friday, August 1, 2025
HomeBusinessWhy is the rear brake always applied to stop the bike? ...

Why is the rear brake always applied to stop the bike? What’s the use of the next break? Why employ companies

highlights

The front brake offers 70% more stopping power than the rear brake.
If you only apply the rear brake, the bike may skid.
The bicycle can only be turned by applying the front brake.

New Delhi. The motorcycle has a unique feature. That means it has two brakes. back and forth. The special thing is that they can be used separately. You can also use the front brake to stop the bike. You can also use the rear brake for this purpose. However, most people only use the rear brake. Many people even advise against touching the front brake of the bike. Then why do companies put a front brake on the bike?

You may be surprised to learn that the front brake provides 70% more stopping power than the rear brake. In addition, most people do not know how to properly and safely stop the bike? Their ignorance leads to accidents from falling, slipping or improperly stopping when braking the motorcycle.

Also read: When stopping the bike, do you use the clutch or the brake first? Even if you’re not wrong, 90% of people don’t know it

When don’t you take the next brake?
The reason we do not apply the front brake of the motorcycle here is that if a beginner applies the front brake of a motorcycle running at high speed, the motorcycle becomes uncontrollable and rolls over. That’s why the teacher advises when learning to drive not to press the next brake. Most people keep this advice aside for life. It should be noted that we should not forcefully apply the next brake when the speed is very high.

Second, unless the motorcycle is level on the road and leaning slightly to the right or left, applying the front brake at this point is also dangerous. In such a situation, the motorcycle may skid. Third, on a fast bike, if you only apply the front brake without applying the rear brake, the rear wheel may become airborne. This can cause the bike to fall uncontrollably. Professional riders only lift the rear wheel of the bike after applying the front brake. It’s called a stoppie in stunt language.

What is the right braking technique?
When we brake our weight and the weight of the bike is shifted forward, it is believed that around 70% of the weight is shifted forward. So when 70% of the weight is shifted forward, front brake application cannot be ignored. If you also stop the bike by using only the rear brake, then you are making a mistake. It’s also stupid to only apply the front brake. Applying only the rear brake can cause the bike to skid, while applying only the front brake can cause the bike to tip over.

The correct way to stop the bike safely is to use both brakes. Start braking with the rear brake. However, do not apply the rear brake so hard that the wheel locks. When the speed is controlled after 2-3 seconds of rear brake application, slightly apply the front brake. Slowly increase the pressure on both brakes. As a result, no wheel gets stuck and there is no chance of the bike falling or skidding. Yes, if you don’t want to stop the bike, just slow down, then you can only use the rear brake, not the front brake.

Also read this – Car Theft: Thieves are high tech, have the key in your pocket and blow up your car, will be played in a few seconds

gear down
To stop the bike safely, you should also change the gear of the bike down to first gear each time you brake. However, you should do this before the bike comes to a complete stop so that your feet are free to rest on the ground when the bike comes to a stop.

Tags: car news, bike news, bike news, driving test

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Read More