Start the bike without a key: If the key of the bike is lost, how to start the bike, understand this method, it will help when you have trouble

Starting the bike without a key: The company puts a lock on the bike to prevent it from being stolen. However, the key is often accidentally lost or the key does not work due to a defect in the lock. In such a situation, only a bicycle mechanic can help you. But if the mechanic isn’t there, your problem gets worse. To solve this problem today we are going to tell you how to start the bike when the key is lost.

We tell you that the bike’s ignition system turns on the power. If the bike key is not present, you will not be able to turn on the ignition. However, as soon as the button is pressed, power goes to the bike’s motor and the bike starts automatically or via kickstarter. We tell you that this trick can only be used on old bikes as new BS-6 bikes and scooters now come with an immobilizer. For this reason it is difficult to start them without a key.

Also Read: This Car From Maruti Ate The Alto K10, The Budget Car That Bent On Features And Performance, And Sales Dropped Every Month

The bike starts without a key

—To do this, you must first place the bike on the center stand and then find the ignition wire coming out of the bike’s handlebars. This cable is connected to the motor that runs under the instrument cluster.

– Under the instrument cluster you will see some cables tied together in a bundle. You need to see which bundle has a cap-like closure system. It is also called male-female socket that can be attached/detached.

After that, you need to remove the chain cap from the side of the handle. Once you take off the cap you will see two to three small holes in the female cap at the other end.

Also Read: Driving: Cars have been driving for years, but people don’t know how to sit properly. This reality is eye opening

After that you need to take a small piece of wire. Both ends of this wire must be inserted into the two different holes that are visible in the cap. Then check whether the cable connection is correct or not by lighting up the light and indicator on the bike. When the bike indicator light and neutral light are on, it means the connection is correct.

—If the connection is not correct, the bike light will not light up. In this case, you can also try putting pieces of wire in different holes.

—To turn off the bike, you must remove the cable, or you can turn off the bike by putting it in gear.

WARNING: The item described is for emergency use only. Do not misuse this information.

,

Tags: car news, Cycles, bike news, bike news